Archidesktop

Feet and Inches Calculator

Add, subtract, multiply and divide feet, inches and fractions like 12' 6 3/4". Also works in meters and millimeters.

How to use

  1. Type an expression or use the keypad. The result updates as you type; press Enter or = to add it to the tape and carry on from the result.
  2. Mark feet with ' and inches with ". In imperial mode, pressing space right after a number adds the feet mark for you.
  3. After feet, the inch mark is optional: 6' 4 1/2 is 6 feet 4 1/2 inches.
  4. A whole number with a fraction is read as inches: 6 1/2. A fraction on its own needs the inch mark (3/4"); without it, 3/4 is division.
  5. A dash is always minus: 4'-4" is 4 feet minus 4 inches. Write 4' 4" for four feet four inches.
  6. Multiply or divide a length by a plain number, and group with parentheses. A number without ' or " is a multiplier on either side, 2 1/2 included: 3 × 10' and 10' × 2 1/2 both work.
  7. Divide a length by a length to see how many times it fits: 10' 6" / 2' is 5.25, shown as 5 × 2'-0" with 6" left.
  8. Multiply two lengths for an area and three for a volume: 12' × 10' is 120 ft². Mark every length, since 12' × 10 is 120 feet.
  9. To enter an area or volume, hold the ft key (m in metric) and pick ft² or ft³: 120ft² / 10' is 12 feet. When typing, ft2, sf, ft3, cf, m2 and m3 work too.
  10. For metric, add m, cm or mm to each number; metric and imperial lengths can be mixed. A plain number is inches, or millimeters when the Units panel is set to metric.
12' 6 3/4" + 3' 2"Add two dimensions
6' 4 1/26 feet 4 1/2 inches (inch mark optional after feet)
3/4"Three quarters of an inch
(3' 6" + 2' 3") * 2Double a sum
10' / 3Split 10 feet into three equal parts
10' 6" / 2'How many 2-foot lengths fit in 10' 6"
12' 6" × 10'Area of a room, in square feet
20' × 10' × 4"Volume of a slab, in cubic feet and yards
1m 250mm + 600mmMetric lengths
3m + 6'Mixed metric and imperial

More tools

Terms of Use · Privacy Policy